16bar high pressure screw air compressor with air tank

Short Description:

It can be matched with 22kw/30hp, 15kw/20hp, 11kw/15hp integrated screw air compressor, which is the most common type of laser cutting machine at present. Air dryer with 500L air tank and high temperature type can cut raw materials such as 1-15mm carbon steel plate and 30mm steel plate. Compared with oxygen cutting and nitrogen cutting, the cost will be higher. Greatly reduced, the cost of nitrogen cutting is relatively expensive, because the cost of a nitrogen generator is equivalent to the cost of countless screw air compressors, and the cutting effect will be very stiff, not the best choice. Oxygen cutting is aimed at very high environmental requirements. . If the environment is not very good, the cutting effect is not very good, the oxygen is very dangerous, and it is flammable and explosive, then the best choice is OPPEIN screw air compressor, integrated screw air compressor

Send email to us

Product Detail

OPPAIR factory introduction

OPPAIR customer feedback

Product Tags

Product Parameters

Normal Pressure

Model	OPA-10F	OPA-15F	OPA-20F	OPA-30F	OPA-10PV	OPA-15PV	OPA-20PV	OPA-30PV
Power(kw)	7.5	11	15	22	7.5	11	15	22
Horsepower(hp)	10	15	20	30	10	15	20	30
Air displacement/ Working pressure (m³/min. / Bar)	1.2/7	1.6/7	2.5/7	3.8/7	1.2/7	1.6/7	2.5/7	3.8/7
	1.1/8	1.5/8	2.3/8	3.6/8	1.1/8	1.5/8	2.3/8	3.6/8
	0.9/10	1.3/10	2.1/10	3.2/10	0.9/10	1.3/10	2.1/10	3.2/10
	0.8/12	1.1/12	1.9/12	2.7/12	0.8/12	1.1/12	1.9/12	2.7/12
Air Tank(L)	380	380/500	380/500	500	380	380/500	380/500	500
Type	Fixed Speed	Fixed Speed	Fixed Speed	Fixed Speed	PM VSD	PM VSD	PM VSD	PM VSD
Air out let diameter	DN20	DN40	DN40	DN40	DN20	DN40	DN40	DN40
Lubricating oil volume (L)	10	16	16	18	10	16	16	18
Noise level dB(A)	60±2	62±2	62±2	68±2	60±2	62±2	62±2	68±2
Driven method	Direct driven	Direct driven	Direct driven	Direct driven	Direct driven	Direct driven	Direct driven	Direct driven
Start method	Υ-Δ	Υ-Δ	Υ-Δ	Υ-Δ	PM VSD	PM VSD	PM VSD	PM VSD
Length (mm)	1750	1820	1820	1850	1750	1820	1820	1850
Width (mm)	750	760	760	870	750	760	760	870
Height (mm)	1550	1800	1800	1850	1550	1800	1800	1850
Weight (kg)	380	420	420	530	380	420	420	530

High Pressure

Model	OPA-15F/16	OPA-20F/16	OPA-30F/16	OPA-15PV/16	OPA-20PV/16	OPA-30PV/16
Power(kw)	11	15	22	11	15	22
Horsepower(hp)	15	20	30	15	20	30
Air displacement/ Working pressure (m³/min. / Bar)	1.0/16	1.2 / 16	2.0 / 16	1.0/16	1.2 / 16	2.0 / 16
Air Tank(L)	380/500	380/500	500	380/500	380/500	500
Air Out let diameter	DN20	DN20	DN20	DN20	DN20	DN20
Type	Fixed Speed	Fixed Speed	Fixed Speed	PM VSD	PM VSD	PM VSD
Driven method	Direct driven	Direct driven	Direct driven	Direct driven	Direct driven	Direct driven
Start method	Υ-Δ	Υ-Δ	Υ-Δ	PM VSD	PM VSD	PM VSD
Length (mm)	1820	1820	1850	1820	1820	1850
Width (mm)	760	760	870	760	760	870
Height (mm)	1800	1800	1850	1800	1800	1850
Weight (kg)	420	420	530	420	420	530

Product description

AIR END

1. Adopts the intermational top-level third-generation asymmetric wire twin-screw air end, adheres to the exquisite manufacturing process, adopts the peak high eficiency low pressure, high-fficiency tooth shape and the axial air inlet design.
2. Optimized flow channel design, with a large rotor, low speed and high eficiency. Increased energy eficiency by 5% -15% compared to the second generation.
3. Uses Swedish SKF heavy-duty bearings, doubl-lip lip shaft seal, durable and reliable. The bearing design life is 80,000-100,000 hours and the air end design life is about 200,000 hours.

SMART CONTROLLER

1. Adopts PLC multilanguage control system, beautiful and intuitive interface, easy to operate function, operators can quickly and easily adjust the compressor.
2. 14 protection functions such as overload protection, short circuit protection, reverse protection, low temperature protection, high voltage protection, etc. to fully protect the unit.
3. The advanced microcomputer control drive system realizes itelligent control, air volume variable speed control, automatic adjustment of load start and soft start. Inelligent dynamic control, dynamic display of the working status of each component of the compressor, visual pressure, temperature, current working curve, etc.
4. Large memory and equipped with printer interface; It can use computer remote monitoring or multiple linkage control between air compressors.

HEAT EXHANGER

1. The heat exchanger uses high-quality raw materials and a unique intemal channel design, which increases the heat exchange area and can effectively dissipate heat for the air compressor.
2. The inner wall of the heat exchanger is treated with corrosion protection to increase the service life of the heat exchanger and increase the heat transfer effect.
3. The radiator has passed the strict factory test, and the quality is reliable, which efetively prevents the high temperature of the air compressor and increases the service life of the machine.

Product Appearance

Laser Cutting Compressor with dryer and tank (4)

Laser Cutting Compressor with dryer and tank (1)

Laser Cutting Compressor with dryer and tank (2)

Previous: Hot Selling Magnet Frequency Conversion Four-in-one Screw Air Compressor

Next: 22KW high pressure screw air compressor 4 in 1

Shandong OPPAIR Machinery Manufacturing Co.,Ld base in Linyi Shandong, anAAA-level enterprise with high-quality service and integrity in China.
OPPAIR as one of the world’s largest air compressor system suppliers, currently developing the following products: Fixed-speed Air Compressors, Permanent Magnet VariableFrequency Air Compressors, Permanent Magnet Variable Frequency Two-stage Air Compressors, 4-IN-1 Air Compressors (lntegrated Air Compressor for Laser Cutting Machine)Supercharger, Freeze Air Dryer, Adsorption Dryer, Air Storage Tank and related accessories.

OPPAIR air compressor products are deeply trusted by customers.

The company has always operated in good faith in the direction of customer service first, integrity first, and quality first. We hope you will join the OPPAIR family and welcome you.