55kw/75hp OPPAIR brand screw air compressor

Short Description:

As an important form of energy generation, screw air compressors are widely used in all aspects of life and production. The OPPAIR screw air compressor is durable, and the appearance is made of high-quality cold-rolled steel plate cover. Using spraying process, 250 ℃ high temperature baking, corrosion resistance, durable.

The screw-type air compressor components of the electrical appliance adopt the components and silver contacts of the world-renowned brand Schneider Electric/ABB, with a service life of more than 3 million times, and long-term safe use is guaranteed. The bearings are imported from Switzerland, which improves the efficiency of the main engine, reduces wear and helps to increase the smoothness of meshing.

Send email to us

Product Detail

OPPAIR factory introduction

OPPAIR customer feedback

Fixed Speed Screw Air Compressor

Model	OPP-10F	OPP-15F	OPP-20F	OPP-30F	OPP-40F	OPP-50F	OPP-60F	OPP-75F
Power (kw)	7.5	11	15	22	30	37	45	55
Horsepower (hp)	10	15	20	30	40	50	60	75
Air displacement/ Working pressure (M³/Min. / bar)	1.2 / 7	1.6 / 7	2.5 / 7	3.8 / 7	5.3 / 7	6.8 / 7	7.4 / 7	10.0 / 7
	1.1 / 8	1.5/8	2.3/8	3.6 / 8	5.0 / 8	6.2 / 8	7.0 / 8	9.2 / 8
	0.9 / 10	1.3 / 10	2.1 / 10	3.2 / 10	4.5 / 10	5.6 / 10	6.2 / 10	8.5 / 10
	0.8 / 12	1.1 / 12	1.9 / 12	2.7 / 12	4.0 / 12	5.0 / 12	5.6 / 12	7.6 / 12
Air out let diameter	DN20	DN25	DN25	DN25	DN40	DN40	DN40	DN50
Lubricating oil volume (L)	10	16	16	18	30	30	30	65
Noise level dB(A)	60±2	62±2	62±2	64±2	66±2	66±2	66±2	68±2
Driven method	Direct driven
Type	Fixed Speed
Start method	Υ-Δ
Length (mm)	950	1150	1150	1350	1500	1500	1500	1900
Width (mm)	670	820	820	920	1020	1020	1020	1260
Height (mm)	1030	1130	1130	1230	1310	1310	1310	1600
Weight (kg)	250	400	400	550	700	750	800	1750

Model	OPP-100F	OPP-125F	OPP-150F	OPP-175F	OPP-200F	OPP-275F	OPP-350F
Power (kw)	75.0	90	110	132	160	200	250
Horsepower (hp)	100	125	150	175	200	275	350
Air displacement/ Working pressure (M³/Min. / bar)	13.4 / 7	16.2 / 7	21.0 / 7	24.5 / 7	32.4 / 7	38.2 / 7	45.5 / 7
	12.6 / 8	15.0 / 8	19.8 / 8	23.2 / 8	30.2 / 8	36.9 / 8	43 / 8
	11.2 / 10	13.8 / 10	17.4 / 10	20.5 / 10	26.9 / 10	33/ / 10	38.9 / 10
	10.0 / 12	12.3 / 12	14.8 / 12	17.4 / 12	23 / 12	28.5 / 12	36 / 12
Air out let diameter	DN50	DN50	DN65	DN65	DN75	DN90	DN90
Lubricating oil volume (L)	65	72	90	90	110	130	150
Noise level dB(A)	68±2	70±2	70±2	70±2	75±2	85±2	85±2
Driven method	Direct driven
Type	Fixed Speed
Start method	Υ-Δ
Length (mm)	1900	2450	2450	2450	2760	2760	2760
Width (mm)	1260	1660	1660	1660	1800	1800	1800
Height (mm)	1600	1700	1700	1700	2100	2100	2100
Weight (kg)	1850	1950	2200	2500	2800	3100	3500

Permanent Magnet Frequency Conversion Series

Model	OPP-10PV	OPP-15PV	OPP-20PV	OPP-30PV	OPP-40PV	OPP-50PV	OPP-60PV	OPP-75PV
Power (kw)	7.5	11	15	22	30	37	45	55
Horsepower (hp)	10	15	20	30	40	50	60	75
Air displacement/ Working pressure (M³/Min. / bar)	1.2 / 7	1.6 / 7	2.5 / 7	3.8 / 7	5.3 / 7	6.8 / 7	7.4 / 7	10.0 / 7
	1.1 / 8	1.5/8	2.3/8	3.6 / 8	5.0 / 8	6.2 / 8	7.0 / 8	9.2 / 8
	0.9 / 10	1.3 / 10	2.1 / 10	3.2 / 10	4.5 / 10	5.6 / 10	6.2 / 10	8.5 / 10
	0.8 / 12	1.1 / 12	1.9 / 12	2.7 / 12	4.0 / 12	5.0 / 12	5.6 / 12	7.6 / 12
Air out let diameter	DN20	DN25	DN25	DN25	DN40	DN40	DN40	DN50
Lubricating oil volume (L)	10	16	16	18	30	30	30	65
Noise level dB(A)	60±2	62±2	62±2	64±2	66±2	66±2	66±2	68±2
Driven method	Direct driven
Type	PM VSD
Start method	Variable frequency start
Length (mm)	950	1150	1150	1350	1500	1500	1500	1900
Width (mm)	670	820	820	920	1020	1020	1020	1260
Height (mm)	1030	1130	1130	1230	1310	1310	1310	1600
Weight (kg)	250	400	400	550	700	750	800	1750

Model	OPP-100PV	OPP-125F	OPP-150PV	OPP-175PV	OPP-200PV	OPP-275PV	OPP-350PV
Power (kw)	75.0	90	110	132	160	200	250
Horsepower (hp)	100	125	150	175	200	275	350
Air displacement/ Working pressure (M³/Min. / bar)	13.4 / 7	16.2 / 7	21.0 / 7	24.5 / 7	32.4 / 7	38.2 / 7	45.5 / 7
	12.6 / 8	15.0 / 8	19.8 / 8	23.2 / 8	30.2 / 8	36.9 / 8	43 / 8
	11.2 / 10	13.8 / 10	17.4 / 10	20.5 / 10	26.9 / 10	33/ / 10	38.9 / 10
	10.0 / 12	12.3 / 12	14.8 / 12	17.4 / 12	23 / 12	28.5 / 12	36 / 12
Air out let diameter	DN50	DN50	DN65	DN65	DN75	DN90	DN90
Lubricating oil volume (L)	65	72	90	90	110	130	150
Noise level dB(A)	68±2	70±2	70±2	70±2	75±2	85±2	85±2
Driven method	Direct driven
Type	PM VSD
Start method	Variable frequency start
Length (mm)	1900	2450	2450	2450	2760	2760	2760
Width (mm)	1260	1660	1660	1660	1800	1800	1800
Height (mm)	1600	1700	1700	1700	2100	2100	2100
Weight (kg)	1850	1950	2200	2500	2800	3100	3500

Product description

AIR END

1. Adopts the intermational top-level third-generation asymmetric wire twin-screw air end, adheres to the exquisite manufacturing process, adopts the peak high eficiency low pressure, high-fficiency tooth shape and the axial air inlet design.
2. Optimized flow channel design, with a large rotor, low speed and high eficiency. Increased energy eficiency by 5% -15% compared to the second generation.
3. Uses Swedish SKF heavy-duty bearings, doubl-lip lip shaft seal, durable and reliable. The bearing design life is 80,000-100,000 hours and the air end design life is about 200,000 hours.

MOTOR

1. The motor adopts a well-known brand high-performance motor. The permanent magnet synchronous motor (PM motor) adopts high-performance permanent magnets, which do not lose magnetism under 200°, and have a service life of up to 15 years.
2. The stator coil adopts the special anti-halation enameled wire for frequency converter, which has excellent insulation performance and longer service life.
3. The motor has a temperature protection function, the motor has a wide range of speed regulation, high precision volume adjustment, and a wide range. Small size, low noise, large overcurrent, significantly improved reliability.
4. Protection class IP55, insulation class F, effectively protect the motor, increase the service life of the motor, and the efficiency is 5%-7% higher than similar products.

SMART CONTROLLER

1. Adopts PLC multilanguage control system, beautiful and intuitive interface, easy to operate function, operators can quickly and easily adjust the compressor.
2. 14 protection functions such as overload protection, short circuit protection, reverse protection, low temperature protection, high voltage protection, etc. to fully protect the unit.
3. The advanced microcomputer control drive system realizes itelligent control, air volume variable speed control, automatic adjustment of load start and soft start. Inelligent dynamic control, dynamic display of the working status of each component of the compressor, visual pressure, temperature, current working curve, etc.
4. Large memory and equipped with printer interface; It can use computer remote monitoring or multiple linkage control between air compressors.

Product features

1. The screw air compressor has the advantages of high stability, high efficiency, low vibration and low noise.

2. The yin and yang rotors and the coordination between the rotor and the casing are set, so that the backflow leakage of the gas is less, and there is no residual clearance volume, so the efficiency is high.

3. The injected lubricating oil has the functions of sealing, cooling, noise reduction and lubrication

4. Compared with piston machine, it has less wearing parts and lower failure rate.

5. The screw compression working curve is smooth, with less vibration and low noise compared with the piston machine.

6. The cooling method is generally divided into: water cooling and air cooling.

7. Heat dissipation system: plate-fin structure and high-quality materials are used to ensure that the cooler can withstand pressure, have high heat dissipation efficiency and good corrosion resistance.

8. Air filter: heavy-duty, multi-stage air inlet filter, dust removal accuracy 1um (98% is filtered out), large working surface, relatively long service life.

9. Oil/gas separator: The new generation of separator adopts a new filter material, with higher efficiency, and the air oil content is less than 2ppm.

10. Intelligent controller: All operations and related data of the air compressor are displayed on the control panel, which can be controlled between your fingers, easy, convenient and accurate.

Air Compressor Equipment - Screw air compressors drive the compression components at the optimum speed for the application through an efficient drive system. Completely maintenance-free during normal operation.

Product Details

40hp Frequency conversion screw air compressor (1)

40hp Frequency conversion screw air compressor (2)

40hp Frequency conversion screw air compressor (3)

Previous: PM Rotary Screw Air Compressors with Industrial IP54/IP55 Explosion Proof Vsd Competitive Price

Next: 40hp Frequency conversion screw air compressor

Shandong OPPAIR Machinery Manufacturing Co.,Ld base in Linyi Shandong, anAAA-level enterprise with high-quality service and integrity in China.
OPPAIR as one of the world’s largest air compressor system suppliers, currently developing the following products: Fixed-speed Air Compressors, Permanent Magnet VariableFrequency Air Compressors, Permanent Magnet Variable Frequency Two-stage Air Compressors, 4-IN-1 Air Compressors (lntegrated Air Compressor for Laser Cutting Machine)Supercharger, Freeze Air Dryer, Adsorption Dryer, Air Storage Tank and related accessories.

OPPAIR air compressor products are deeply trusted by customers.

The company has always operated in good faith in the direction of customer service first, integrity first, and quality first. We hope you will join the OPPAIR family and welcome you.