8 Year Exporter Portable Air Electric Compressor - 55kw/75hp OPPAIR brand screw air compressor – OPPAIR

Fixed Speed Screw Air Compressor

Permanent Magnet Frequency Conversion Series

Product description

AIR END

1. Adopts the intermational top-level third-generation asymmetric wire twin-screw air end, adheres to the exquisite manufacturing process, adopts the peak high eficiency low pressure, high-fficiency tooth shape and the axial air inlet design.
2. Optimized flow channel design, with a large rotor, low speed and high eficiency. Increased energy eficiency by 5% -15% compared to the second generation.
3. Uses Swedish SKF heavy-duty bearings, doubl-lip lip shaft seal, durable and reliable. The bearing design life is 80,000-100,000 hours and the air end design life is about 200,000 hours.

MOTOR

1. The motor uses high-performance motors of well-known brands. Permanent magnet synchronous motors (PM motors) use high-performance NdFeB permanentmagnets which will not lose magnetism under 200. and its service life reaches as long as 15 years.
2. The stator coil uses the frequency converter special halo proof enameled wire, theinsulation is outstanding and the service life is longer.
3. The motor has the function of temperature protection. It also has a wide range of motor speed regulation, high precision and wide range of volume regulation. The reliability is significantly improved with small size, low noise and large excess current.
4. Protection grade IP55, insulation grade F, efectively protects the motor and increases the serice life of the motor, the eficiency is 5% 7% higher than similar products.

SMART CONTROLLER

1. Adopts PLC multilanguage control system, beautiful and intuitive interface, easy to operate function, operators can quickly and easily adjust the compressor.
2. 14 protection functions such as overload protection, short circuit protection, reverse protection, low temperature protection, high voltage protection, etc. to fully protect the unit.
3. The advanced microcomputer control drive system realizes itelligent control, air volume variable speed control, automatic adjustment of load start and soft start. Inelligent dynamic control, dynamic display of the working status of each component of the compressor, visual pressure, temperature, current working curve, etc.
4. Large memory and equipped with printer interface; It can use computer remote monitoring or multiple linkage control between air compressors.

Product features

1. The screw air compressor has the advantages of high stability, high efficiency, low vibration and low noise.

2. The yin and yang rotors and the coordination between the rotor and the casing are set, so that the backflow leakage of the gas is less, and there is no residual clearance volume, so the efficiency is high.

3. The injected lubricating oil has the functions of sealing, cooling, noise reduction and lubrication

4. Compared with piston machine, it has less wearing parts and lower failure rate.

5. The screw compression working curve is smooth, with less vibration and low noise compared with the piston machine.

6. The cooling method is generally divided into: water cooling and air cooling.

7. Heat dissipation system: plate-fin structure and high-quality materials are used to ensure that the cooler can withstand pressure, have high heat dissipation efficiency and good corrosion resistance.

8. Air filter: heavy-duty, multi-stage air inlet filter, dust removal accuracy 1um (98% is filtered out), large working surface, relatively long service life.

9. Oil/gas separator: The new generation of separator adopts a new filter material, with higher efficiency, and the air oil content is less than 2ppm.

10. Intelligent controller: All operations and related data of the air compressor are displayed on the control panel, which can be controlled between your fingers, easy, convenient and accurate.

Air Compressor Equipment – Screw air compressors drive the compression components at the optimum speed for the application through an efficient drive system. Completely maintenance-free during normal operation.

Product Details

Factory Tour

Shandong OPPAIR Machinery Manufacturing Co.,Ld base in Linyi Shandong, anAAA-level enterprise with high-quality service and integrity in China.
OPPAIR as one of the world’s largest air compressor system suppliers, currently developing the following products: Fixed-speed Air Compressors, Permanent Magnet VariableFrequency Air Compressors, Permanent Magnet Variable Frequency Two-stage Air Compressors, 4-IN-1 Air Compressors (lntegrated Air Compressor for Laser Cutting Machine)Supercharger, Freeze Air Dryer, Adsorption Dryer, Air Storage Tank and related accessories.

OPPAIR air compressor products are deeply trusted by customers.

The company has always operated in good faith in the direction of customer service first, integrity first, and quality first. We hope you will join the OPPAIR family and welcome you.