The application range of air compressors is still very wide, and many industries are using OPPAIR air compressors. There are many types of air compressors. Let's take a look at the replacement method of the OPPAIR air compressor filter.
1. Replace the air filter
First, the dust on the surface of the filter should be removed to prevent contamination of the equipment during the replacement process, thereby affecting the quality of gas production. When replacing, first knock, and use dry air to remove dust in the opposite direction. This is the most basic inspection of the air filter, so as to check the problems caused by the filter, and then decide whether to replace and repair.
2. Replace the oil filter
The cleaning of the filter housing is still not to be underestimated, because the oil is viscous and it is easy to block the filter. After checking various performances, add oil to the new filter element and rotate it for many times. Check for tightness.
3. Replace the oil-air separator
When replacing, it should start from various small pipelines. After dismantling the copper pipe and cover plate, remove the filter element, and then clean the shell in detail. After replacing the new filter element, install it according to the opposite direction of removal.
Note: When replacing the filter, it must be ensured that the equipment is not running, and various parts must be checked against static electricity during installation, and the installation must be tightly installed to avoid accidents.
Post time: Sep-01-2022
