1. What is a four-in-one air compressor unit?
The all-in-one screw air compressor unit can integrate multiple air source equipment, such as rotary screw air compressors, air dryers, filters, and air tanks, to form a complete compressed air system, design different air source equipment in a platform-based manner, and build an efficient air source equipment combination, so as to achieve fast and efficient disposal of compressed air.
2. Application of OPPAIR 4-in-1 screw air compressor units
The OPPAIR four-in-one rotary air compressor unit is mostly used in occasions with high requirements for compressed air quality, such as food, medicine, electronics, aviation, automobiles and other fields. The equipment has low noise, light smell and saves maintenance costs, making it a more popular compressed air source equipment.
3. Core functional modules
Screw air compressor: responsible for compressing air and providing a stable air source.
Air dryer: removes moisture from compressed air to ensure dry output air.
Filter: filters impurities in the air to ensure air quality.
Air tank: stores compressed air to keep air pressure stable when demand fluctuates.
4. Advantages of the OPPAIR four-in-one screw air compressor unit
Save space：The all-in-one rotary air compressor unit integrates multiple air source equipment, which can save a lot of space during use compared to a single air source equipment.
Improve efficiency：The tank mounted all-in-one rotary screw air compressor unit realizes the platform design of air source equipment, which can realize the simultaneous operation of multiple air source equipment and improve the efficiency of air source use.
Reduce energy consumption：The 4-in-1 screw air compressor unit can realize full automatic control of the compressed air system and achieve more energy-saving purposes.
Reduce maintenance costs：Integrating multiple air source equipment together can reduce maintenance costs, and can reduce the downtime of the unit caused by replacement, maintenance and other reasons during maintenance, thereby reducing the operating cost of the unit.
5. Summary
The OPPAIR four-in-one screw air compressor unit is a device that integrates multiple air source equipment together to form an efficient and space-saving air source equipment combination, and has the advantages of energy saving and reduced maintenance costs. Its application field is very wide and it is a very popular air source equipment.
The maintenance of the OPPAIR all-in-one screw air compressor mainly includes the following aspects:
Replacement of lubricating oil and filter:
Lubricating oil: The newly purchased air compressor needs to be replaced with new oil after the first 500 hours of operation, and then every 4000 hours. If the annual operation time is less than 4000 hours, it is also recommended to replace it once a year.
Oil filter: Replace it after 300-500 hours of operation for the first time, replace it after 2000 hours for the second time, and then replace it every 2000 hours.
Air filter: Replace it after 500 hours of operation for the first time, and then replace it every 2000 hours.
Maintenance of belts and cooling systems:
Belt: Check the tightness of the belt every 2000 hours or so. If it is too loose, adjust it to a tight state and prevent the belt from being contaminated by oil.
Cooling system: Clean the cooler every 2000 hours of operation, remove dust from the heat dissipation surface, and remove the cooler for cleaning if necessary.
Other routine inspections and maintenance:
Electrical system: Check electrical components every month to ensure that wires, plugs, circuit breakers, etc. are working properly.
Safety valve: It is not recommended for users to adjust it privately, and it must be done under the guidance of professionals.
Discharge of condensed water: Develop a condensed water discharge schedule based on humidity conditions to ensure that the machine is shut down, there is no pressure in the oil and gas separation tank, and it is discharged after sufficient cooling.
Daily inspection: Check the unit for abnormal sounds and leaks every week, and whether the instrument readings and temperature displays are normal; check the machine for rust and looseness every month; remove dust from the outer surface of the cooler and the fan cover and blades every three months, and check the hoses and electrical components.
By regularly performing these maintenance and maintenance work, the service life of the air compressor can be effectively extended and its stable operation can be ensured.
OPPAIR is looking for global agents, welcome to contact us for inquiries: WhatsApp: +86 14768192555
Post time: Mar-31-2025
