Original Factory Portable Rotary Screw Air Compressor - Screw Air Compressor – OPPAIR

Short Description:

Send email to us

Product Detail

OPPAIR factory introduction

OPPAIR customer feedback

Feedback (2)

Adhering into the basic principle of "quality, assistance, effectiveness and growth", we have attained trusts and praises from domestic and worldwide client for Compresor De Tornillo , Portable High Pressure Compressor , 50 Cfm Screw Compressor , Our company insists on innovation to promote the sustainable development of enterprise, and make us become the domestic high-quality suppliers.

Original Factory Portable Rotary Screw Air Compressor - Screw Air Compressor – OPPAIR Detail:

Fixed Speed Screw Air Compressor

Model	OPP-10F	OPP-15F	OPP-20F	OPP-30F	OPP-40F	OPP-50F	OPP-60F	OPP-75F
Power (kw)	7.5	11	15	22	30	37	45	55
Horsepower (hp)	10	15	20	30	40	50	60	75
Air displacement/ Working pressure (M³/Min. / bar)	1.2 / 7	1.6 / 7	2.5 / 7	3.8 / 7	5.3 / 7	6.8 / 7	7.4 / 7	10.0 / 7
	1.1 / 8	1.5/8	2.3/8	3.6 / 8	5.0 / 8	6.2 / 8	7.0 / 8	9.2 / 8
	0.9 / 10	1.3 / 10	2.1 / 10	3.2 / 10	4.5 / 10	5.6 / 10	6.2 / 10	8.5 / 10
	0.8 / 12	1.1 / 12	1.9 / 12	2.7 / 12	4.0 / 12	5.0 / 12	5.6 / 12	7.6 / 12
Air out let diameter	DN20	DN25	DN25	DN25	DN40	DN40	DN40	DN50
Lubricating oil volume (L)	10	16	16	18	30	30	30	65
Noise level dB(A)	60±2	62±2	62±2	64±2	66±2	66±2	66±2	68±2
Driven method	Direct driven
Type	Fixed Speed
Start method	Υ-Δ
Length (mm)	950	1150	1150	1350	1500	1500	1500	1900
Width (mm)	670	820	820	920	1020	1020	1020	1260
Height (mm)	1030	1130	1130	1230	1310	1310	1310	1600
Weight (kg)	250	400	400	550	700	750	800	1750

Model	OPP-100F	OPP-125F	OPP-150F	OPP-175F	OPP-200F	OPP-275F	OPP-350F
Power (kw)	75.0	90	110	132	160	200	250
Horsepower (hp)	100	125	150	175	200	275	350
Air displacement/ Working pressure (M³/Min. / bar)	13.4 / 7	16.2 / 7	21.0 / 7	24.5 / 7	32.4 / 7	38.2 / 7	45.5 / 7
	12.6 / 8	15.0 / 8	19.8 / 8	23.2 / 8	30.2 / 8	36.9 / 8	43 / 8
	11.2 / 10	13.8 / 10	17.4 / 10	20.5 / 10	26.9 / 10	33/ / 10	38.9 / 10
	10.0 / 12	12.3 / 12	14.8 / 12	17.4 / 12	23 / 12	28.5 / 12	36 / 12
Air out let diameter	DN50	DN50	DN65	DN65	DN75	DN90	DN90
Lubricating oil volume (L)	65	72	90	90	110	130	150
Noise level dB(A)	68±2	70±2	70±2	70±2	75±2	85±2	85±2
Driven method	Direct driven
Type	Fixed Speed
Start method	Υ-Δ
Length (mm)	1900	2450	2450	2450	2760	2760	2760
Width (mm)	1260	1660	1660	1660	1800	1800	1800
Height (mm)	1600	1700	1700	1700	2100	2100	2100
Weight (kg)	1850	1950	2200	2500	2800	3100	3500

Permanent Magnet Frequency Conversion Series

Model	OPP-10PV	OPP-15PV	OPP-20PV	OPP-30PV	OPP-40PV	OPP-50PV	OPP-60PV	OPP-75PV
Power (kw)	7.5	11	15	22	30	37	45	55
Horsepower (hp)	10	15	20	30	40	50	60	75
Air displacement/ Working pressure (M³/Min. / bar)	1.2 / 7	1.6 / 7	2.5 / 7	3.8 / 7	5.3 / 7	6.8 / 7	7.4 / 7	10.0 / 7
	1.1 / 8	1.5/8	2.3/8	3.6 / 8	5.0 / 8	6.2 / 8	7.0 / 8	9.2 / 8
	0.9 / 10	1.3 / 10	2.1 / 10	3.2 / 10	4.5 / 10	5.6 / 10	6.2 / 10	8.5 / 10
	0.8 / 12	1.1 / 12	1.9 / 12	2.7 / 12	4.0 / 12	5.0 / 12	5.6 / 12	7.6 / 12
Air out let diameter	DN20	DN25	DN25	DN25	DN40	DN40	DN40	DN50
Lubricating oil volume (L)	10	16	16	18	30	30	30	65
Noise level dB(A)	60±2	62±2	62±2	64±2	66±2	66±2	66±2	68±2
Driven method	Direct driven
Type	PM VSD
Start method	Variable frequency start
Length (mm)	950	1150	1150	1350	1500	1500	1500	1900
Width (mm)	670	820	820	920	1020	1020	1020	1260
Height (mm)	1030	1130	1130	1230	1310	1310	1310	1600
Weight (kg)	250	400	400	550	700	750	800	1750

Model	OPP-100PV	OPP-125F	OPP-150PV	OPP-175PV	OPP-200PV	OPP-275PV	OPP-350PV
Power (kw)	75.0	90	110	132	160	200	250
Horsepower (hp)	100	125	150	175	200	275	350
Air displacement/ Working pressure (M³/Min. / bar)	13.4 / 7	16.2 / 7	21.0 / 7	24.5 / 7	32.4 / 7	38.2 / 7	45.5 / 7
	12.6 / 8	15.0 / 8	19.8 / 8	23.2 / 8	30.2 / 8	36.9 / 8	43 / 8
	11.2 / 10	13.8 / 10	17.4 / 10	20.5 / 10	26.9 / 10	33/ / 10	38.9 / 10
	10.0 / 12	12.3 / 12	14.8 / 12	17.4 / 12	23 / 12	28.5 / 12	36 / 12
Air out let diameter	DN50	DN50	DN65	DN65	DN75	DN90	DN90
Lubricating oil volume (L)	65	72	90	90	110	130	150
Noise level dB(A)	68±2	70±2	70±2	70±2	75±2	85±2	85±2
Driven method	Direct driven
Type	PM VSD
Start method	Variable frequency start
Length (mm)	1900	2450	2450	2450	2760	2760	2760
Width (mm)	1260	1660	1660	1660	1800	1800	1800
Height (mm)	1600	1700	1700	1700	2100	2100	2100
Weight (kg)	1850	1950	2200	2500	2800	3100	3500

Product description

OPPAIR air compressor adopts Jiangtian IP55 high protection grade motor, Baosi host, Schneider contactor, stable performance, sufficient air supply, can support long-term operation, low noise, no vibration, long service life, currently exported to more than 50 Country, loved by customers, with CE and SGS certificates, the quality is trustworthy.

AIR END

1. Adopts the intermational top-level third-generation asymmetric wire twin-screw air end, adheres to the exquisite manufacturing process, adopts the peak high eficiency low pressure, high-fficiency tooth shape and the axial air inlet design.
2. Optimized flow channel design, with a large rotor, low speed and high eficiency. Increased energy eficiency by 5% -15% compared to the second generation.
3. Uses Swedish SKF heavy-duty bearings, doubl-lip lip shaft seal, durable and reliable. The bearing design life is 80,000-100,000 hours and the air end design life is about 200,000 hours.

MOTOR

1. The motor uses high-performance motors of well-known brands. Permanent magnet synchronous motors (PM motors) use high-performance NdFeB permanentmagnets which will not lose magnetism under 200. and its service life reaches as long as 15 years.
2. The stator coil uses the frequency converter special halo proof enameled wire, theinsulation is outstanding and the service life is longer.
3. The motor has the function of temperature protection. It also has a wide range of motor speed regulation, high precision and wide range of volume regulation. The reliability is significantly improved with small size, low noise and large excess current.
4. Protection grade IP55, insulation grade F, efectively protects the motor and increases the serice life of the motor, the eficiency is 5% 7% higher than similar products.

MOTOR
smart controller

SMART CONTROLLER

1. Adopts PLC multilanguage control system, beautiful and intuitive interface, easy to operate function, operators can quickly and easily adjust the compressor.
2. 14 protection functions such as overload protection, short circuit protection, reverse protection, low temperature protection, high voltage protection, etc. to fully protect the unit.
3. The advanced microcomputer control drive system realizes itelligent control, air volume variable speed control, automatic adjustment of load start and soft start. Inelligent dynamic control, dynamic display of the working status of each component of the compressor, visual pressure, temperature, current working curve, etc.
4. Large memory and equipped with printer interface; It can use computer remote monitoring or multiple linkage control between air compressors.

FAN

1. The fan uses a large fan design to effectively enhance the fan’s heat dissipation effect.The motor adopts a special intermnal design to adapt to harsh working conditions.
2. The fan motor adopts specal winding and high protection grade design to adapt to harsh working conditions.
3. The fan is controlld by the controller to realie the automatic start and stop function, which efctively maintains the normal working temperature of the air compressor lubricant.

fan
INTAKE VALVE

INTAKE VALVE

1. Intake valve is the core component to control the air intake of the air compressor.
2. Adopting the world famous brand air intake valve, it can automatically adjust theair volume by 0-100% according to the requirement of the system air quantity. It promises small pressure loss, stable action and long life consequently reduced operating costs.

HEAT EXHANGER

1. The heat exchanger uses high-quality raw materials and a unique intemal channel design, which increases the heat exchange area and can effectively dissipate heat for the air compressor.
2. The inner wall of the heat exchanger is treated with corrosion protection to increase the service life of the heat exchanger and increase the heat transfer effect.
3. The radiator has passed the strict factory test, and the quality is reliable, which efetively prevents the high temperature of the air compressor and increases the service life of the machine.

HEAT EXHANGER

Product features

1. The screw air compressor has the advantages of high stability, high efficiency, low vibration and low noise.

2. The yin and yang rotors and the coordination between the rotor and the casing are set, so that the backflow leakage of the gas is less, and there is no residual clearance volume, so the efficiency is high.

3. The injected lubricating oil has the functions of sealing, cooling, noise reduction and lubrication

4. Compared with piston machine, it has less wearing parts and lower failure rate.

5. The screw compression working curve is smooth, with less vibration and low noise compared with the piston machine.

6. The cooling method is generally divided into: water cooling and air cooling.

7. Heat dissipation system: plate-fin structure and high-quality materials are used to ensure that the cooler can withstand pressure, have high heat dissipation efficiency and good corrosion resistance.

8. Air filter: heavy-duty, multi-stage air inlet filter, dust removal accuracy 1um (98% is filtered out), large working surface, relatively long service life.

9. Oil/gas separator: The new generation of separator adopts a new filter material, with higher efficiency, and the air oil content is less than 2ppm.

10. Intelligent controller: All operations and related data of the air compressor are displayed on the control panel, which can be controlled between your fingers, easy, convenient and accurate.

Air Compressor Equipment – Screw air compressors drive the compression components at the optimum speed for the application through an efficient drive system. Completely maintenance-free during normal operation.