Screw air compressor Four in one PM VSD hot sell

Short Description:

The combined screw air compressor integrates the parts including screw compressor, freeze drier, fine filter and air tank, making it convenient for the user to install, use and move. After the air pass the integrated system, the quality of the air is made largely better to satisfy process requirements of various companies. It is of beautiful appearance, stable performance and economy. It is one of the important series exported by our company.


Product Detail

OPPAIR factory introduction

OPPAIR customer feedback

Product Tags

Product Parameters

Normal Pressure

Model OPA-10F OPA-15F OPA-20F OPA-30F OPA-10PV OPA-15PV OPA-20PV OPA-30PV
Power(kw) 7.5 11 15 22 7.5 11 15 22
Horsepower(hp) 10 15 20 30 10 15 20 30
Air displacement/
Working pressure (m³/min. / Bar)
1.2/7 1.6/7 2.5/7 3.8/7 1.2/7 1.6/7 2.5/7 3.8/7
1.1/8 1.5/8 2.3/8 3.6/8 1.1/8 1.5/8 2.3/8 3.6/8
0.9/10 1.3/10 2.1/10 3.2/10 0.9/10 1.3/10 2.1/10 3.2/10
0.8/12 1.1/12 1.9/12 2.7/12 0.8/12 1.1/12 1.9/12 2.7/12
Air Tank(L) 380 380/500 380/500 500 380 380/500 380/500 500
Type Fixed Speed Fixed Speed Fixed Speed Fixed Speed PM VSD PM VSD PM VSD PM VSD
Air out
let diameter
DN20 DN40 DN40 DN40 DN20 DN40 DN40 DN40
Lubricating oil volume (L) 10 16 16 18 10 16 16 18
Noise level dB(A) 60±2 62±2 62±2 68±2 60±2 62±2 62±2 68±2
Driven method Direct driven Direct driven Direct driven Direct driven Direct driven Direct driven Direct driven Direct driven
Start method Υ-Δ Υ-Δ Υ-Δ Υ-Δ PM VSD PM VSD PM VSD PM VSD
Length (mm) 1750 1820 1820 1850 1750 1820 1820 1850
Width (mm) 750 760 760 870 750 760 760 870
Height (mm) 1550 1800 1800 1850 1550 1800 1800 1850
Weight (kg) 380 420 420 530 380 420 420 530

High Pressure

Model OPA-15F/16 OPA-20F/16 OPA-30F/16 OPA-15PV/16 OPA-20PV/16 OPA-30PV/16
Power(kw) 11 15 22 11 15 22
Horsepower(hp) 15 20 30 15 20 30
Air displacement/
Working pressure (m³/min. / Bar)
1.0/16 1.2 / 16 2.0 / 16 1.0/16 1.2 / 16 2.0 / 16
Air Tank(L) 380/500 380/500 500 380/500 380/500 500
Air Out let diameter DN20 DN20 DN20 DN20 DN20 DN20
Type Fixed Speed Fixed Speed Fixed Speed PM VSD PM VSD PM VSD
Driven method Direct driven Direct driven Direct driven Direct driven Direct driven Direct driven
Start method Υ-Δ Υ-Δ Υ-Δ PM VSD PM VSD PM VSD
Length (mm) 1820 1820 1850 1820 1820 1850
Width (mm) 760 760 870 760 760 870
Height (mm) 1800 1800 1850 1800 1800 1850
Weight (kg) 420 420 530 420 420 530

Product description

AIR END

AIR END

1. Adopts the intermational top-level third-generation asymmetric wire twin-screw air end, adheres to the exquisite manufacturing process, adopts the peak high eficiency low pressure, high-fficiency tooth shape and the axial air inlet design.
2. Optimized flow channel design, with a large rotor, low speed and high eficiency. Increased energy eficiency by 5% -15% compared to the second generation.
3. Uses Swedish SKF heavy-duty bearings, doubl-lip lip shaft seal, durable and reliable. The bearing design life is 80,000-100,000 hours and the air end design life is about 200,000 hours.

MOTOR

1. The motor adopts a well-known brand high-performance motor. The permanent magnet synchronous motor (PM motor) adopts high-performance permanent magnets, which do not lose magnetism under 200°, and have a service life of up to 15 years.
2. The stator coil adopts the special anti-halation enameled wire for frequency converter, which has excellent insulation performance and longer service life.
3. The motor has a temperature protection function, the motor has a wide range of speed regulation, high precision volume adjustment, and a wide range. Small size, low noise, large overcurrent, significantly improved reliability.
4. Protection class IP55, insulation class F, effectively protect the motor, increase the service life of the motor, and the efficiency is 5%-7% higher than similar products.

MOTOR
smart controller

SMART CONTROLLER

1. Adopts PLC multilanguage control system, beautiful and intuitive interface, easy to operate function, operators can quickly and easily adjust the compressor.
2. 14 protection functions such as overload protection, short circuit protection, reverse protection, low temperature protection, high voltage protection, etc. to fully protect the unit.
3. The advanced microcomputer control drive system realizes itelligent control, air volume variable speed control, automatic adjustment of load start and soft start. Inelligent dynamic control, dynamic display of the working status of each component of the compressor, visual pressure, temperature, current working curve, etc.
4. Large memory and equipped with printer interface; It can use computer remote monitoring or multiple linkage control between air compressors.

Product details

4-IN-1 Compressor (1)
4-IN-1 Compressor (2)
4-IN-1 Compressor (4)
sdzxcxz1
sdzxcxz6
sdzxcxz5
4 (1)

  • Previous:
  • Next:

  • Shandong OPPAIR Machinery Manufacturing Co.,Ld base in Linyi Shandong, anAAA-level enterprise with high-quality service and integrity in China.
    OPPAIR as one of the world’s largest air compressor system suppliers, currently developing the following products: Fixed-speed Air Compressors, Permanent Magnet VariableFrequency Air Compressors, Permanent Magnet Variable Frequency Two-stage Air Compressors, 4-IN-1 Air Compressors (lntegrated Air Compressor for Laser Cutting Machine)Supercharger, Freeze Air Dryer, Adsorption Dryer, Air Storage Tank and related accessories.

    58A2EACBC881DE5F623334C96BC46739

    Factory Tour (1)

    OPPAIR air compressor products are deeply trusted by customers.

    The company has always operated in good faith in the direction of customer service first, integrity first, and quality first. We hope you will join the OPPAIR family and welcome you.

    E9640D0E11B7B67A858AD8C5017D1DF8

    1-14lQLPJx_QX4nhtVrNDUzNDUywKRE8SQbxHA4EorU0h0DfAA_3404_3404